MAGNETIC FUEL CONDITIONER FOR PETROL AND DIESEL ENGINES
Environmentally friendly solution to fuel economy and cleaner air
Burn fuel more efficiently
- More Miles Per Gallon
- Improved Engine Performance
- Reduced Emissions
- Cleaner Air
Magnetic Fuel Conditioners increase combustion efficiency for a cleaner burning engine. This reduces harmful emissions while increasing
engine performance.
|
Enjoy these benefits
- Save Fuel - Save Money - More Miles Per Gallon
- Save £££s at The Pump - 10% fuel saving is not uncommon. 7 Series BMW owner reported 57p per gallon savings (May 2001)
- 50% Reduction of Carbon Monoxide & Hydrocarbons
- Helps Pass Emission Testing
- High Octane Performance with Lower Octane Fuel
- Improved Performance - Quicker Starts
- Stops Scale Build-up and Corrosion in Engine
- Reduced Wear 0n O2 Sensor and Catalytic Converter
Simple to install: No tools - no cutting of fuel lines required. Install magnet as close to the fuel injector as possible. The magnet
and steel backing plate are held in place by the cable ties supplied.
|
| MAGNETIC CONDITIONER FOR NATURAL GAS AND HOME FUEL OIL
Money Saving Free Energy
- Reduces the consumption of fuel oil, natural gas
and low pressure gas (propane, calor gas) by giving it a positive charge for better oxygen bonding. A 10% reduction is not
uncommon.
- Dissolves carbon/varnish build-up in lines, jets, injectors, valves, chambers/fireboxes
for cleaner, more efficient running.
Simple to install: No tools required. Install magnet as close as possible to the gas boiler/cooker/appliance. The magnet
and steel backing plate are held in place by the cable ties supplied.
|
MAGNETIC CONDITIONER FOR WATER
The healthy, environmentally friendly answer to hard water
Your water feels and tastes better. Foul odours such as chlorine or sulphur are reduced and the corrosive scale
is washed away before it can damage your water heater and pipes. Thus saving you energy and money!
- Reduces and eliminates scale build-up in your water pipes without the need for chemical additives.
- Dissolves mineral deposits in plumbing systems, improves performance,
maximizes water pressure.
Nottingham University, Plant Science Division,
installed our magnetic conditioners on the main water supply to their greenhouses. University report states
"Since their installation the problem of calcium deposits blocking the solenoids that control the automatic feeding
system has been alleviated." Cost saving £1456.00 per annum.
Read Nottingham University's report - click here |
Simple to install: No tools required. Install magnet on the cold water supply, above or below the stop tap. The magnet
and steel backing plate are held in place by the cable ties supplied.
|
  Before & After Treatment |
HARD WATER SCALE ROBS YOU. DID YOU KNOW?
1/64" (0.39mm) of scale costs you 4% in efficiency
1/4" (6.35mm) of scale costs you 28% in efficiency
1/2" (12.7mm) of scale costs you 60% in efficiency
1/4" (6.35mm) of scale costs you 760lbs of wasted coal,
380 gallons of wasted oil, and 380 cubic feet of wasted gas.
|
Purchase Guide & Pricing
|
| Application |
Order code |
Price inc VAT & UK/EU Delivery |
| Petrol Engines up to 2.0 litres |
Magnetic conditioner 501 (normally £49.98) |
£39.25 each |
|
| Petrol/Diesel Engines up to 3.5 litres |
Magnetic conditioner 101 (normally £62.80) |
£48.75 /each |
|
| Water Conditioner (standard - for houses up to 3 bedrooms) |
Magnetic conditioner 501 (normally £49.98) |
£39.25 each |
|
| Water Conditioner (heavy-duty - for larger dwellings/premises) |
Magnetic conditioner 101 (normally £62.80) |
£48.75 /each |
|
| Home Fuel Oil |
Magnetic conditioner 501 (normally £49.98) |
£39.25 each |
|
| Natural Gas (standard - for pipes up to 15mm diameter) |
Magnetic conditioner 501 (normally £49.98) |
£39.25 each |
|
| Natural Gas (heavy-duty - for pipes over 15mm diameter) |
Magnetic conditioner 101 (normally £62.80) |
£48.75 /each |
|
